Trade listing
Marine Winches, Cranes & HPUs
Winches and HPUs competitively priced and promptly available. Cranes built to order. Hydraulic and electric winches, hydraulic power units, marine cranes, controls and deck equipment. 400–690 V · 50/60 Hz.
5–250 THydraulic winches
5–60 TElectric winches
37 kW–900 HPHPU range
1–80 TCranes to order
All data for reference and subject to change. Confirm ratings and options before order. Drum (D/d ≥ 16) = barrel diameter at least 16 × rope diameter. SS = stainless steel brake band. WE = warping end. RL = raised jib / CL = collapsed jib.
01 — Hydraulic winches
Competitively priced · Promptly available
Offshore, marine, port, construction, shipyard and mining. Single drum, double series or waterfall. Anchor handling / towing, multi-drum + windlass, multi-point mooring, slipway / loadout, A-frame, vehicle tow, cable pulling.
| Series | Winch type | Drum | Wire | Length | Pull @ 1st layer | Brake hold | Brake | Clutch | Auto spool | Drum stop | Warping end |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | 5 Ton | Single | Ø22 mm | 300 m | 7 T × 12 m/min | 20 T | Auto / Hyd. | Hyd. / Claw | No | Yes | — |
| Standard | 8 Ton | Single | Ø24 mm | 250 m | 10 T × 12 m/min | 20 T | Auto / Hyd. | Hyd. / Claw | No | Yes | — |
| Standard | 12 Ton | Single | Ø28 mm | 200 m | 12 T × 12 m/min | 15 T | Auto / Hyd. | Hyd. / Claw | Optional | Yes | 330 mm |
| Standard | 18 Ton | Single | Ø28 mm | 450 m | 18 T × 10 m/min | 36 T | Auto / Hyd. | Hyd. / Claw | No | Yes | 380 mm |
| Standard | 20 Ton (small drum) | Single | Ø28 mm | 500 m | 20 T × 10 m/min | 36 T | Auto / Hyd. | Hyd. / Claw | Optional | Yes | 380 mm |
| Standard | 20 Ton | Single | Ø36 mm | 1000 m | 20 T × 10 m/min | 60 T | Auto / Hyd. | Hyd. / Claw | Yes | Yes | — |
| Standard | 20 Ton WE | Single | Ø36 mm | 1000 m | 20 T × 10 m/min | 60 T | Auto / Hyd. | Hyd. / Claw | Yes | Yes | 450 mm |
| Standard | 20 Ton SS | Single | Ø36 mm | 1000 m | 20 T × 10 m/min | 60 T | Auto / Hyd. | Hyd. / Claw | Yes | Yes | — |
| Drum D/d ≥ 16 | 20 Ton (small drum) | Single | Ø36 mm | 500 m | 20 T × 10 m/min | 40 T | Auto / Hyd. | Hyd. / Claw | Yes | Yes | 450 mm |
| Standard | 25 Ton | Single | Ø44 mm | 700 m | 25 T × 10 m/min | 90 T | Auto / Hyd. | Hyd. / Claw | Yes | Yes | 450 mm |
| Standard | 25 Ton SS | Single | Ø44 mm | 700 m | 25 T × 10 m/min | 90 T | Auto / Hyd. | Hyd. / Claw | Yes | Yes | 450 mm |
| Drum D/d ≥ 16 | 25 Ton | Single | Ø44 mm | 1000 m | 25 T × 10 m/min | 90 T | Auto / Hyd. | Hyd. / Claw | Yes | Yes | 450 mm |
| Standard | 35 Ton | Single | Ø44 mm | 1000 m | 35 T × 10 m/min | 90 T | Auto / Hyd. | Hyd. / Claw | Yes | Yes | 450 mm |
| Drum D/d ≥ 16 | 35 Ton | Single | Ø44 mm | 1000 m | 35 T × 10 m/min | 90 T | Auto / Hyd. | Hyd. / Claw | Yes | Yes | 450 mm |
| Standard | 45 Ton | Single | Ø42 mm | 1000 m | 45 T × 7 m/min | 120 T | Auto / Hyd. | Hyd. / Claw | Yes | Yes | — |
| Standard | 50 Ton | Single | Ø46 mm | 900 m | 50 T × 7 m/min | 120 T | Auto / Hyd. | Hyd. / Claw | Yes | Yes | — |
| Standard | 60 Ton | Single | Ø50 mm | 1000 m | 60 T × 10 m/min | 130 T | Auto / Hyd. | Hyd. / Claw | Yes | Yes | — |
| Standard | 80 Ton | Single | Ø52 mm | 1000 m | 80 T × 10 m/min | 130 T | Auto / Hyd. | Hyd. / Claw | Yes | Yes | — |
| Standard | 100 Ton | Single | Ø54 mm | 1150 m | 100 T × 8 m/min | 150 T | Auto / Hyd. | Hyd. / Claw | Yes | Yes | — |
| Drum D/d ≥ 16 | 100 Ton | Single | Ø50 mm | 1150 m | 100 T × 8 m/min | 150 T | Auto / Hyd. | Hyd. / Claw | Yes | Yes | — |
| Standard | 150 Ton | Single | Ø60 mm | 1000 m | 150 T × 10 m/min | 230 T | Auto / Hyd. | Hyd. / Claw | Yes | Yes | — |
| Drum D/d ≥ 16 | 150 Ton | Single | Ø71 mm | 600 m | 150 T × 10 m/min | 230 T | Auto / Hyd. | Hyd. / Claw | Yes | Yes | — |
| Standard | 250 Ton | Single | Ø70 mm | 1400 m | 250 T × 10 m/min | 360 T | Auto / Hyd. | Hyd. / Claw | Yes | Yes | — |
| Standard | 18 Ton | Double series | Ø28 mm | 2 × 450 m | 18 T × 10 m/min | 36 T | Auto / Hyd. | Hyd. / Claw | No | Yes | 380 mm |
| Standard | 35 Ton | Double series | Ø32 mm | 2 × 1200 m | 35 T × 10 m/min | 55 T | Auto / Hyd. | Hyd. / Claw | No | Yes | 450 mm |
| Standard | 25 Ton | Double waterfall | Ø32 mm | 2 × 1000 m | 25 T × 10 m/min | 60 T | Auto / Hyd. | Hyd. / Claw | Yes | — | — |
| Standard | 25 Ton SS | Double waterfall | Ø32 mm | 2 × 1000 m | 25 T × 10 m/min | 60 T | Auto / Hyd. | Hyd. / Claw | Yes | — | — |
| Standard | 35 Ton | Double waterfall | Ø44 mm | 2 × 1000 m | 35 T × 10 m/min | 90 T | Auto / Hyd. | Hyd. / Claw | Yes | — | — |
| Standard | 60 Ton | Double waterfall | Ø50 mm | 2 × 1000 m | 60 T × 12 m/min | 130 T | Auto / Hyd. | Hyd. / Claw | Yes | — | — |
| Standard | 100 Ton | Double waterfall | Ø52 mm | 2 × 1200 m | 100 T × 6 m/min | 150 T | Auto / Hyd. | Hyd. / Claw | Yes | — | — |
| Standard | 150 Ton (dual motors) | Double waterfall | Ø52 mm | 1000 m | 2 × 80 T × 10 m/min | 2 × 175 T | Auto / Hyd. | Hyd. / Claw | Yes | — | — |
Other ranges and larger first-layer pulls available on request.
02 — Electric winches
Competitively priced · Promptly available
400–690 V · 50/60 Hz.
| Winch type | Drum | Wire | Length | Pull @ 1st layer | Brake hold | Brake | Clutch | Gear box | Auto spool |
|---|---|---|---|---|---|---|---|---|---|
| 5 Ton | Single | Ø22 mm | 300 m | 5 T × 12 m/min | 15 T | Motor / Manual | Electric / Manual | Helical | No |
| 15 Ton | Single | Ø28 mm | 700 m | 15 T × 12 m/min | 30 T | Motor / Manual | Electric / Manual | Helical | Yes |
| 25 Ton | Single | Ø36 mm | 700 m | 25 T × 10 m/min | 50 T | Motor / Manual | Electric / Manual | Helical | Yes |
| 35 Ton | Single | Ø36 mm | 750 m | 35 T × 10 m/min | 70 T | Motor / Manual | Electric / Manual | Helical | Yes |
| 45 Ton | Single | Ø44 mm | 750 m | 45 T × 8 m/min | 90 T | Motor / Manual | Electric / Manual | Helical | Yes |
| 60 Ton | Single | Ø50 mm | 900 m | 60 T × 10 m/min | 100 T | Motor / Manual | Electric / Manual | Helical | Yes |
03 — Hydraulic power units
Competitively priced · Promptly available · Offshore
Electric motor or diesel. Single or double pump. Weatherproof, all-weather, fully enclosed or silenced. NAS-type filtration. Typical max working pressure 250 bar. 400–690 V · 50/60 Hz. Other sizes on enquiry.
| HPU type | Drive | Casing | Pump flow | Tank | Cooling | Filtration | Optional |
|---|---|---|---|---|---|---|---|
| 37 kW | Electric | Weatherproof | 87 L/min | 950 L | Optional | Single | — |
| 37 kW | Electric | All weather | 87 L/min | 950 L | Axial fan oil cooler | Single | — |
| Twin 37 kW | Electric | All weather | 2 × 87 L/min | 2000 L | Axial fan oil cooler | 2 × Single | Oil temp. controller |
| 55 kW | Electric | Weatherproof | 140 L/min | 1200 L | Optional | Single | — |
| 55 kW | Electric | All weather | 140 L/min | 1200 L | Axial fan oil cooler | Single | — |
| Twin 55 kW | Electric | All weather | 2 × 140 L/min | 2500 L | Axial fan oil cooler | 2 × Dual | Oil temp. controller |
| 90 kW | Electric | Open top | 207 L/min | 1800 L | Optional | Dual | Oil temp. controller |
| 90 kW | Electric | All weather | 207 L/min | 1800 L | Axial fan oil cooler | Dual | Oil temp. controller |
| Twin 90 kW | Electric | All weather | 2 × 207 L/min | 2800 L | Axial fan oil cooler | 2 × Dual | Oil temp. controller |
| Twin 90 kW | Electric | Fully enclosed | 2 × 207 L/min | 2800 L | Axial fan oil cooler | 2 × Dual | Oil temp. controller |
| Twin 132 kW | Electric | Fully enclosed | 2 × 280 L/min | 3200 L | Axial fan oil cooler | 2 × Dual | Oil temp. controller |
| Twin 160 kW | Electric | Fully enclosed | 2 × 400 L/min | 3500 L | Axial fan oil cooler | 2 × Dual | Oil temp. controller |
| 58 HP | Diesel | All weather | 87 L/min | 680 L | Axial fan oil cooler | Single | — |
| 217 HP | Diesel | All weather | 207 L/min | 1400 L | Axial fan oil cooler | Dual | Fuel level gauge |
| 217 HP | Diesel | Fully enclosed | 207 L/min | 1400 L | Axial fan oil cooler | Dual | 25 kVA alternator |
| 217 HP | Diesel | Silent | 207 L/min | 1400 L | Axial fan oil cooler | Dual | 25 kVA alternator |
| 308 HP | Diesel | All weather | 2 × 207 L/min | 2500 L | Axial fan oil cooler | Dual | Fuel level gauge |
| 308 HP | Diesel | Fully enclosed | 2 × 207 L/min | 2500 L | Axial fan oil cooler | Dual | 25 kVA alternator |
| 308 HP | Diesel | Silent | 2 × 207 L/min | 2500 L | Axial fan oil cooler | Dual | 25 kVA alternator |
| 657 HP | Diesel | Fully enclosed | 500 L/min | 3500 L | Axial fan oil cooler | High pressure | 25 kVA alternator |
| 900 HP | Diesel | Fully enclosed | 700 L/min | 4500 L | Axial fan oil cooler | High pressure | 25 kVA alternator |
04 — Marine cranes
Built to order
Fixed boom, knuckle boom, fold/flow boom, telescopic and provision cranes. Table is typical 25–50 T SWL; overall range about 1–80 T. Built to project specification. 400–690 V · 50/60 Hz.
| SWL (T) | Radius max (m) | Radius min (m) | Jib angle RL / CL | Load × speed (T × m/min) | Luffing RL / CL (s) | Slewing (r/min) |
|---|---|---|---|---|---|---|
| 25 | 22 | 4 | 25° / 0° | 25 × 20 | 50 / 90 | 0.8 |
| 25 | 26 | 4.5 | 25° / 0° | 5 × 40 | 63 / 120 | 0.6 |
| 25 | 30 | 5 | 25° / 0° | 25 × 20 or 10 × 30 | 63 / 120 | 0.6 |
| 30 | 22 | 4 | 25° / 0° | 30 × 20 | 50 / 90 | 0.8 |
| 30 | 26 | 4.5 | 25° / 0° | 6 × 40 | 63 / 120 | 0.6 |
| 30 | 30 | 5 | 25° / 0° | 30 × 20 or 12 × 30 | 63 / 120 | 0.6 |
| 35 | 22 | 4.5 | 25° / 0° | 35 × 15 | 63 / 120 | 0.6 |
| 35 | 26 | 5 | 25° / 0° | 7 × 30 | 80 / 150 | 0.5 |
| 35 | 30 | 5.5 | 25° / 0° | 35 × 15 or 14 × 20 | 80 / 150 | 0.5 |
| 40 | 22 | 4.5 | 25° / 0° | 40 × 12 | 63 / 120 | 0.5 |
| 40 | 26 | 5 | 25° / 0° | 8 × 24 | 80 / 150 | 0.4 |
| 40 | 30 | 5.5 | 25° / 0° | 40 × 12 or 16 × 18 | 80 / 150 | 0.4 |
| 50 | 22 | 4.5 | 25° / 0° | 50 × 10 | 80 / 150 | 0.4 |
| 50 | 26 | 5 | 25° / 0° | 10 × 20 | 100 / 180 | 0.3 |
| 50 | 30 | 5.5 | 25° / 0° | 50 × 10 or 20 × 15 | 100 / 180 | 0.3 |
05 — Accessories
Controls and options
| Accessory | Function |
|---|---|
| Electrical remote (winch & HPU) | Up to 10-point mooring winches and multiple electric HPUs. Central console: clutch, speed, joystick, main power, emergency cut-off, lamp check. |
| Wireless remote | Clutch, speed and drum joystick. Portable transmitter. Unobstructed range up to 100 m. |
| Line load monitoring | Measures tension, payout length and winching speed. Separate unit or winch-mounted. |
| Constant tension (CT) | Holds set line pull; pays in/out automatically. Closed- or open-loop on hydraulic; inverter on electric. Multi-winch console available. |
| Active heave compensation | Motion-sensor input; pays in/out to keep load height constant. |
| Drag brake | Controlled restriction when main brake is off; free-fall and controlled drop. |
| Drum / clutch / brake lights | Weatherproof running and status lights. Height-adjustable, detachable. |
| Drum guard / rope cage | Protection for operator and deck crew. |
| Marine 25 kVA alternator | Auxiliary 440/220 V from the HPU engine. |
| Dual pumps in tandem | Equal split or combined flow on engine HPUs. |
| Soft-starter panel | Smooth start, lower inrush, protection and monitoring for electric HPUs. |
| Fully enclosed / silent HPU | Noise-sensitive / offshore. Lifting points. Sound-level certificate on request. |
| Seawater / freshwater cooler | Hydraulic oil cooler from vessel supply or submersible pump. |
06 — Related deck equipment
Also available
- Electric capstan — vertical or horizontal, pull to 20 T, speed to 15 m/min
- Anchor windlass / combination winch — single or double gypsy, electric or hydraulic, chain to 120 mm
- Shark jaw & towing pin — hydraulic, remote, load-tested
- Chain stopper — chain to 120 mm
- Spooler / coiling machine — 35–150 T reel, hydraulic constant back-tension
- Compact winch + HPU packages
- Hazardous-area / certified HPUs
- Deck fittings — chocks, bollards, fairleads, shackles, anchors, wire rope
07 — Services
Support
- Fabrication and engineering
- Installation and commissioning, including wire-rope install
- Repair, maintenance, calibration and testing
- Procurement of deck equipment and hydraulic spares
- FAT and third-party class inspection
- In-house load and brake testing